A profile in clear grade, finger jointed, kiln-dried Hoop Pine sourced from plantations in Queensland. Clear grade means that the timber is supplied free of knots. Hoop Pine is a superior timber to Radiata and other pine species commonly used for stretcher arms, as it is less prone to warping. No brace is needed when both lengths are under 110CM.
For lengths above 110CM see our recommended bracing configuration in our FAQ
Timber:Kiln-dried Hoop Pine Profile:42mm width, 32mm thickness Bevel:9 degrees, i.e. 32mm outside thickness, 27mm inside thickness Join:European mitred mortice and tenon with slots for wedges
Items over 1.5mtrs will attract anOversized Shipping Charge of $50.SeeShipping below for pricing details.
All stretcher bars and braces are hand-made by us in our factory, located in Brunswick, Victoria.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.