METRIC STRETCHER

A profile in clear grade, finger jointed, kiln-dried Hoop Pine sourced from plantations in Queensland. Clear grade means that the timber is supplied free of knots. Hoop Pine is a superior timber to Radiata and other pine species commonly used for stretcher arms, as it is less prone to warping.
No brace is needed when both lengths are under 110CM. 

For lengths above 110CM see our recommended bracing configuration in our FAQ

Technical details:

Timber: Kiln-dried Hoop Pine
Profile: 42mm width, 32mm thickness
Bevel: 9 degrees, i.e. 32mm outside thickness, 27mm inside thickness
Join: European mitred mortice and tenon with slots for wedges

Items over 1.5mtrs will attract an Oversized Shipping Charge of $50. See Shipping below for pricing details.

All stretcher bars and braces are hand-made by us in our factory, located in Brunswick, Victoria.

Metric Braces for Metric Stretcher Bars

Timber: Finger Jointed Hoop Pine

Profile: 67mm x 24mm with bevelled corners. 

No brace is needed when both stretcher bar lengths are under 42'' (1066mm). 

For lengths above 42" (1066mm) see our recommended bracing configuration in our FAQ

Items over 1.5mtrs will attract an Oversized Shipping Charge of $50. See Shipping below for pricing details.

All stretcher bars and braces are hand-made by us in our factory, located in Brunswick, Victoria.