WRC - Western Red Cedar 32mm - Inch

We use plantation-grown Western Red Cedar sourced from Canada for both stretcher arms and any bracing lengths.

This is a traditional stretcher in its premium timber. Due to its open grain and high resistance to changes in humidity, cedar is a lightweight and true timber especially suitable for large frames. 

No brace is needed when both lengths are 42'' (1066mm) and under. 

Cedar or Pine bracing is available for this profile. If you would prefer Pine bracing then please order PQP bracing here.

For lengths above 42" (1066mm) see our recommended bracing configuration in our FAQ

Technical details:

Timber: Kiln-dried Western Red Cedar
Profile: 67mm width, 32mm thickness
Bevel: 9 degrees, i.e. 32mm outside thickness, 27mm inside thickness
Join: European mitred mortice and tenon with slots for wedges

Items over 1.5mtrs will attract an Oversized Shipping Charge of $50. See Shipping below for pricing details.

All stretcher bars and braces are hand-made by us in our factory, located in Brunswick, Victoria.